Renault CAN/K-line ECU Tool

Rated 4.75 out of 5 based on 4 customer ratings
(4 customer reviews)

£645.00

OBDII tool with various Renault car electronic control unit internal memory modification functions, such as Read/Write EEPROM or FLASHClear Immobilizer Code, Read Immobilizer Status and Program Cards. There is no need to open control unit, de-solder memory IC or connect any wires directly to it. All functions works by OBDII connector, but any supported control unit can be connected “on the bench” using Connection Manual.

Clear Immobilizer Code function is fully automated – just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared – no future programming is required.

In stock

SKU: R-ECUTool Category: Tags: , ,

Description

Software V2.63 supports:

  • EDC15C3 (both CAN-BUS and WIRE immo systems) – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EDC15C13  – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 31H  – Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 34 (both CAN-BUS and WIRE immo systems) – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 35  – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3132 (both CAN-BUS and WIRE immo systems) – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3134 (both CAN-BUS and WIRE immo systems) – Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SID301Read/Write EEPROM, Read/Write FLASH, Clear Immo Code, Clear IMPACT DETECTED, Read stored mileage
  • SIM32 – Read/Write EEPROMRead/Write FLASH from HD64F7055Clear Immo Code
  • SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) – Read TMS374 EEPROM, Clear Immo Code (car runs without immobilizer code)
  • IAW 6R.20Read/Write TMS370 EEPROM
  • IAW 6R.30Read TMS370 EEPROM, Clear Immo Code  (car runs without immobilizer code)
  • VALEO BII for ESPACE III – Read/Write (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup
  • VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) – Read transponder data, Configure, Reset to VIRGIN
  • VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) – Read PINCODE, Reset to VIRGIN
  • INSTRUMENT CLUSTER for ESPACE III (1998-2002) – Reset odometer, Erase RF remote programming  by instrument cluster connector
  • SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) – Read/Write 68HC05B16 EEPROM, read transponder data
  • SIEMENS UCH for MEGANE/SCENIC (’98-’02) – Read/Write 705B32 EEPROM, Read/Write configurationLearn Keys
  • LAGUNA II, ESPACE IV, VELSATIS, LAGUNA II Ph2, ESPACE IV Ph2, VELSATIS Ph2 – KeyCard Programming, Change VIN. Reset UCH to VIRGIN (! IMPROVED !)
  • MEGANE II, SCENIC II, MEGANE II Ph2, SCENIC II Ph2 – KeyCard Programming, Change VIN, Reset UCH to VIRGIN
  • INSTRUMENT CLUSTER for SCENIC II (’04-’08) – Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM
  • CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-’07) – Read/Write EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN (NEW FEATURES !)
  • KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO (’07-) – Key Learning, Change VIN, Reset UCH to VIRGIN (NEW FEATURES !)
  • KANGOO II (2007-2012) – Key Programming, Change VIN, Reset BCM to VIRGIN (NEW FEATURES !)
  • MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS) – Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC
  • MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) – Clear Immo Code, Change VIN by OBDII
  • TWINGO III ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) – Clear Immo Code, Change VIN by OBDII 
  • LAGUNA III (2007-2015) – KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • LATITUDE (2010+) – KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • CLIO III / MODUS – Key Programming, Change VIN, Learn ECM in protected mode, Reset BCM to VIRGIN (NEW FEATURES !) 
  • CLIO III – Card Programming, Change VIN, Reset UCH to VIRGIN
  • MASTER III (2010-) – Key Programming, Change VIN, Reset BCM to VIRGIN (NEW FEATURES !)
  • WIND (2010-2013) – Key Programming, Change VIN, Learn ECM
  • TWINGO II (2007-2013) – Key Programming, Change VIN, Learn ECM
  • TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL – Key Programming, Change VIN
  • LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) – Key Programming, Change VIN
  • MEGANE III / SCENIC III (2009-2015) – Card Programming, Change VIN, Reset BCM to VIRGIN
  • KOLEOS (2008+) – KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • EDC17 / MED17 TRICORE EEPROM DUMP CRC – Reset EEPROM dump to VIRGIN, repair block checksums
  • MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) – Erase CRASH DATA by OBDII / direct connection
  • LAGUNA III AIRBAG (AUTOLIV RC5) – Erase CRASH DATA by OBDII / direct connection
  • TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) – Erase CRASH DATA by OBDII / direct connection
  • MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) – Erase CRASH DATA by OBDII / direct connection
  • AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) – Erase CRASH DATA by OBDII / direct connection
  • MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) – Erase CRASH DATA by OBDII / direct connection
  • CLIO II X65 AIRBAG (BOSCH AB8) – Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • ESPACE III AIRBAG (SIEMENS) – Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) – Erase CRASH DATA, Read EEPROM by OBDII / direct connection
  • KADJAR AIRBAG (AUTOLIV AC7 with MCU XC2336) – Erase CRASH DATA by OBDII / direct connection (NEW !)
All necessary files can be found on our website in the DOWNLOAD section

Feel free to contact us for any enquiries

Additional information

Weight 0.5 kg
Dimensions 35 x 25 x 5 cm

4 reviews for Renault CAN/K-line ECU Tool

  1. Rated 4 out of 5

    Michael

    Got what i wanted, no problem with it so far. but IMHO shipping to Dublin 3 days is a bit too slow

  2. Rated 5 out of 5

    Emilio

    This small box is fantastic. Hope to deal with you again. Thank you
    One thing only.Don’t use Royal Mail if you send to Portugal NEVER! they use GLS in my country. Absolutely awful service ! Waited 7 days for my parcel from you. I know was given info 5days+ but on tracking website after 2 days parcel were collected by GLS in Portugal and I got it after 7 days. Avoid them at all costs. THE WORST COMPANY EVER. BEWARE !

    • Technical Support

      Thank you Emilio for your comment. We know that the Royal Mail uses GLS for all overseas parcel shipping.
      We’ve already received few reviews about GLS in Portugal, Germany and Spain and that is why we are contracting with DPD and DHL now. We apologize for the inconvenience and Thank you so much for sharing your experience with us.

  3. Rated 5 out of 5

    liviu_hassan (verified owner)

    great tool. does the job. hope i will get more updates and tool is going to be developed more to 2017 cars. thank you.

  4. Rated 5 out of 5

    Sean

    Great packaging, fast shipping to Leeds, fabulou service, happy enough mate Highly Recommend !

    • Technical Support

      We’re glad you’re happy with our service.
      If you still need further assistance regarding any technical issues about the Renault ECU Tool, do not hesitate to ask, we’re here to help you.
      Thank you again.

Add a review

Your email address will not be published. Required fields are marked *