DynoRoad - for owners of MagicMotorSport products
DynoRoad - The Portable Car Dyno
a fast and easy road dynamometer for testing your vehicle’s performance
This is DynoRoad - for owners of MagicMotorSport products
If you are owner of any MAGICMOTORSPORT product, and you have at least one registered product,
and you have access to MMS HELPDESK account, this offer is for you.
there is only one difference - the price (if you have already a registered product like Flex or MagPro, buy this one DynaRoad cheaper)
If you don't have any MAGICMOTORSPORT products and want to be a new user, click below:
DynoRoad - The Portable Car Dyno
DynoRoad The Portable Car Dyno is a fast and easy road dynamometer for testing your vehicle's performance.
DynoRoad is an innovative mobile car dyno that measures power and torque in both electric and traditional vehicles via an app installed on your mobile device.
This road dyno is so small and compact you can always have it with you and it can be installed on your car in just two minutes.
What is a DynoRoad ?
DynoRoad is an innovative mobile car dyno that measures power and torque in both electric and traditional vehicles via an app installed on your mobile device. This road dyno is so small and compact you can always have it with you and it can be installed on your car in just two minutes.
With DynoRoad the measurements are highly accurate and repeatable by simply entering the correct vehicle weight and the tire dimensions. In addition, this car dyno has an integrated weather module that will allow you to measure ambient temperature and atmospheric pressure.
DynoRoad allows you to consistently repeat results under similar conditions with a margin of error of less than 1%
The device is equipped with a Bluetooth WIFI connection and the calibration and the measurement of engine parameters is monitored through a smartphone app.
The device is characterized by a compact housing that can be carried with you on the go.
Note: this car dyno is intended for track-use only, do not use on public streets or public spaces.
Smart Mobile Application
DynoRoad’s application software user interface is simple and intuitive, designed for anyone that knows how to use a mobile phone. The app walks you through the initial set-up of the car dyno and gives you clear and understandable options to accurately measure the horsepower and torque of your vehicle but you can also analyze and compare the results of these measurements.
- Measure vehicle power in a real-life scenario
- Customize your reports to your needs
- Analyze your measurements
- Compare your modification results
Performing a Car Dyno Test is no Longer a Problem
Getting started with DynoRoad is as easy as mounting the car dyno on the vehicle’s wheel, pressing the ON / OFF switch and connecting it to your mobile device.
Fasten your seat belts and start your engine: after activating your car dyno with a Magicmotorsport account, you’ll need to enter your car details to perform accurate measurements.
You can quickly and easily calibrate DynoRoad by maintaining 3000RPM for 5 seconds, while moving your vehicle at least 30 kmh in 4th gear. Additionally, you can change these settings to accommodate different vehicles by adjusting RPM level, gear choice and elapsed time to your desired values. Once the calibration is successful you're ready to roll!
How does a dyno test work?
First, Install DynoRoad on the vehicle wheel in the non-drive axle.
After mounting the dynamometric probe with the supplied connections, press the ON / OFF switch.
After pressing the ON/OFF button, the white STATUS LED flashes
From this moment on it will be possible to connect the car dyno to the App and be guided in the power tests.
Fasten your seat belts and start your engine: after activating the device through the MAGICMOTORSPORT account, the configuration will be started.
In the first screen, configure the measurement by specifying the parameters: name and brand of the vehicle, size and mass,and tire size.
You can calibrate DynoRoad by maintaining 3000RPM for 5 seconds, while moving your vehicle at least 30 kmh in 4th gear. Additionally, you can change these settings to accommodate different vehicles by adjusting RPM level, gear choice and elapsed time to your desired values.
The measurement involves two phases:
Phase 1. Acceleration
Phase 2. Automatic deceleration after idle. The second phase lasts about 10 seconds. The program automatically signals the end of the deceleration phase with an acoustic signal.
Press GO to start measuring. The message "you can move" is displayed. Vehicle power measurement is usually done in third or fourth gear in the available engine speed range.
To accurately calculate the torque and obtain the correct graph, it is advisable to move the vehicle in first and second gear at low speed, then after engaging the third or fourth gear, launch the measurement.
The application also allows you to enter a very precise acceleration time from 0 to 100 km / h, up to 200 km / h, and drive for a ¼ mile stretch during which engine performance can be measured and evaluated.
Regardless of the transmission type, the GO button and the accelerator pedal will be in the same position.
After reaching the required speed or measuring range, the vehicle can be stopped. When braking the power values will be incorrect, but the acceleration results will be correct and will automatically appear on the screen when a certain speed is reached on a stretch of road.
|8mm allen key||1|
|10mm allen key||1|
|4 pcs bolt attachment set - 17mm, 19mm, 21mm, 22mm||1|
|M12 threaded bolt||1|
|M10 screw & spring washer||1|
Together with the road dyno you will also receive an accessory kit for easy installation.
There are no additional costs after purchase. DynoRoad can be used without any constraints.
This tool requires a subscription fee after one year of use.
You can buy subscriptions here.
What is a DynoRoad ?
How to activate DynoRoad ?