T-CAN PRO Software License

Ex Tax: 850.00€
Product Code: T-CANPRO-SOFT
Availability: Out Of Stock

Software License for T-CAN PRO

for TESLA Car Model S X 3

What is the software license for T-CAN PRO ?

The software was developed for T-CAN PRO hardware to solve problems during Tesla car repairs
Software you can download from our download T-CAN Pro section

but the software requires a license to  fully work, which you will receive after purchase by email.

This is a small file that you will receive after purchasing a license to your email address.

New version is available directly from manufacturer at your email request.

t-can pro set
T-CAN PRO hardware

To work with that software you will need T-CAN with set of cables

Go to T-CAN hardware

YES - You need to buy this hardware and software together

We get a lot of questions... Should I buy the software or hardware as well ?

The answer is YES, because the software is a key, it's constantly being developed and improved. The hardware needs this software to work.

The tool we sell separately because hardware has evolved and some customers want to buy only new hardware.


Buy the software together with T-CAN hardware which is available here:

to avoid an additional fee for shipping the SIM card which is part of software licence.

If you buy hardware and software together, the SIM card will be installed and you will pay only once for shipping.


At te moment T-CAN PRO can work with ECU TESLA Model S,X and 3 and is able to:

  • 2019.05.23 NEW SDM by BOSH  Module X and 3 model (read,clear fault codes and R/W EEPROM clear CRASH log.)
  • ALERTS – Alerts on CAN bus (read  alerts codes updated BMS 2018.09.14 BETA STAGE !)
  • BDY - Body controller on CAN bus
  • DH - Door Handles - Learn Front Driver Side - CAN BDY -125 kbps (BETA Stage - added 15.07.2019)
  • SDM – Supplemental Deployment Module S model (read,clear fault codes,clear  CRASH log by Boot mode pin.)
  • SDM by BOSH  Module X and 3 model (read,clear fault codes and R/W EEPROM clear CRASH log.)
  • SEC – Security controller (Add Keyfob Key)
  • CP – Charging port.
  • PARK2 – Parktronic sensors (read and decode fault codes,erase stored fault codes)
  • THC – Thermal controller (Airpurge function)
  • EAS-TAS – Tesla Airsuspension System (read,decode,erase fault codes,clear Crash event, exit service mode ) supported until 06.2016
  • BMS – Battery control Module (reset alert warnings w163,w026,w152,w153,w023,read softpack)
  • TPMS – Tyre Pressure (read sensor ID stored in memory it usefull if you need to make new non tesla sensor)
  • ESP – Electronic stability system (read and decode fault codes,erase stored fault codes)


The software is required to work with hardware !


1.    Car Programmer – plastic blue box with info label on top, inside is PCB (Printed Circuit Boards with semiconductors and SIM card). The device does not contain batteries

2. 2 Data cables (type: x437 and x437A) - these 2 cables are used to connect the car to the programmer

3. USB cable – this cable is using to connect the programmer to the PC or Laptop


The software you need to work with T-CAN PRO programmer.

There is no other software.

The software is frequently updated, so it is recommended to check from time to time [ T-CAN PRO - DOWNLOAD SECTION ] to see if new software is available.

To understand more

some features in the new software are not active because the software is constantly developed.

because Tesla is based on the linux system, you will need administrator "root" access to perform some operations
How to get administrator privileges/rights you have to find out for yourself

click and read alert to find out more about them.

If you have some problems with your airsuspension system,
you can find out more about it, even clear errors and restart the ECU after that.

we get an email from customer with question:

"I have a model Tesla X with errors like:

1.  BMS_w153_SW_neg_contactor_welded (hidden),

2.   [no audience],

3.   BMS_w153_SW_neg_contactor_welded,

4.   BMS_a153_coilCurrent=--; BMS_a153_vehicle12V=--; BMS_a153_Vdiff=--; BMS_a153_ctrErrType=--; BMS_a153_ctr=--; BMS_a153_contactorState=--

1.  BMS_w153_SW_neg_contactor_welded (hidden),

I've replaced the comntactors but i need to reset the eror, Will T-CAN PRO solve this?"

[Our reply] The answer sounds YES,

This is contactor stress alert

In MBS section are buttons who can Reset after contactor/s replaced

You need click ]Reset Open Positive Contractor] and negative welded just folow on each buttont and will show hint

You need after function sucess reconect loop and 12 v power


The software has also "Beta Options" added as an extra options for free.
You are not BETA Tester, you do not have to use it but if you want,
remember you doing this on your own responsibility !
So, you are willing to accept the blame if something bad happens as a result.

You can befor contact to manufacturer - info@t-can.lt

N O T I C E     R E G A R D I N G    S O F T W A R E

The Tool is designed for absolutely qualified personnel ONLY !

You must understand risk of LOOSES if YOU do something WRONG !!! like learning keys or make adaptations of BMS controller.


You can return hardware but not software.
Hardware can be damaged, faulty and we can replace with new one or refund.

Read more about guarantees and returns in your European Union /read it in your language/

!!!!!!!!!!!!!!!!     Software are not refundable     !!!!!!!!!!!!!

Refunds and cancellation policy https://premium-tools24.com/refunds

Once we have sent you the software activation file, you cannot return it.

User Manual is very clear and you can download it together with software pack (link below)

S U P P O R T !

Technical support is provided by the manufacturer via email
you will receive all necessary information together with the license file if you purchase the software.

You need to know that T-CAN PRO has forum (Russian language only)


A lot of people ask about training, We or manufacturer do not provide any training. Sorry.

after shopping you will receive an email with licence file - what you should do with that file can be find in manual (downloadable with T-CAN PACK software)

Download the T-CAN-PACK (software + drivers + manual)

Run it without installation and check the features and capabilities of T-CAN PRO

New version is available directly from manufacturer at your email request.

Software, diagrams and other files you can find in our Download section

Write a review

Note: HTML is not translated!
    Bad           Good