T-CAN PRO Tool for Tesla S, X, 3

£789.00 £900.00
Product Code: T-CANTOOL
Availability: In Stock


Diagnostic and Programming Tool

for TESLA Car Model S X 3







T-CAN PRO has very fast developing software and hardware with small box interface. Can help you solve a few problems with the TESLA car "Model S, X and 3".

T-CAN PRO can work with ECU TESLA Model S,X,3

  • ALERTS – Alerts on CAN bus ( read  alerts codes updated BMS 2018.09.14)
  • BDY - Body controller on CAN bus
  • SDM – Supplemental Deployment Module S model (read,clear fault codes,erase  CRASH log by Boot mode pin.)
  • SEC – Security controller updated information details 2018.09.14 (Add Keyfob Key)
  • CP – Charging port.
  • PARK2 – Parktronic sensors (read and decode fault codes,erase stored fault codes,Updated fault codes 2018.07.08)
  • THC – Thermal controller (Add some features 2018.07.08, Airpurge function)
  • EAS-TAS – Tesla Airsuspension System (read and decode fault codes,erase stored fault codes,exit service mode ) - supported until 06.2016
  • BMS – Battery control Module (reset alert warnings w163,w026,w152,w153,w023)
  • TPMS – Tyre Pressure Monitor System (read and decode fault codes,erase stored fault codes)
  • ESP – Electronic stability system (read and decode fault codes,erase stored fault codes)



T-CAN PRO software screenshots






some features in the new software are not active because the software is constantly developed.






     For Professionals only !

What you need to know before you start thinking about Diagnostic Tool T-CAN for Tesla MODEL S & X  !

- This Tool is designed for absolutely qualified personnel ONLY !!!

- You must understand risk of LOOSES if YOU do something WRONG !!! like learning keys or make adaptations of BMS controller.

- You must have skills of electronics (for making adapters or make connection to vehicle CAN connector) !

- Multiplexer has plug x437 and working with TESLA before 09.2015. If you have a car TESLA MODEL S after 09.2015 and up you need to make by self adapter DB15 - x437A according to the [ diagram ]


User Manual is very clear and you can download it together with software pack (link below)








 

Connector x437 (female) has to be plug into Tesla Diagnostic Connector (male)

If you do not know how to find Diagnostic Connector, take a look on video below from 49 sec. till 1.10 mins.:






Earlier T-CAN was sold without a multiplexer, that's why you can find in download section adapter diagram
The adapter with connector x437 for TESLA befor 09.2015 you can do yourself, or just better option to buy and use multiplexer. We sell a set - T-CAN + Multiplexer.




Work on the bench while developing the T-CAN tool









Download the software (run it without installation) and check the features and capabilities of T-CAN PRO


Software, diagrams and other files you can find in our Download section




Write a review

Note: HTML is not translated!
    Bad           Good