Renault CAN/K-line ECU Tool

£645.00
Product Code: RENAULT-ECUTool
Availability: In Stock





RET1

ECU Programming

All OBDII tools offer some basic functionality, which includes the ability to read and clear codes.

This OBDII tool offer the ability to work with various Renault car electronic control unit internal memory modification functions, such as:

  • Read/Write EEPROM or FLASH,
  • Clear Immobilizer Code,
  • Read Immobilizer Status
  • Key/Cards Programming,

RET2

Ease of use

With ease of use and convenience in mind, Renault Ecu Tool programmer has been designed to read and program vehicle ECUs through the car's diagnostic port OBDII, meaning 90% of the time there is no need to open control unit, de-solder memory IC or connect any wires directly to it.

You can Clear Immobilizer Code function automatically by just press one button



RET3

Reliable and Affordable

Renault ECU Tool (RET) is an affordable, high performance, PC to vehicle programming interface,working by OBDII,supporting different Renault cars from 1996 to 2017.
Since 1997 Immo Tools have been working on immobiliser repairs.
Many complicated issues were solved and thanks to these experiences, hard work and engagement has been created Renault ECU Tool which is still being developed.




is a Fantastic Tool For You and Your Business's Growth







There is no need to open control unit, de-solder memory IC or connect any wires directly to it.
All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using Connection Manual
Clear Immobilizer Code function is fully automated – just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared – no future programming is required.


Renault CAN/K-line ECU programming tool - basicly, this is not a tool for TOTAL immobilizer disabling - it only clears previosly memorised immobilizer code to give abillity of using second-hand Engine Control Unit (ECU) in particular car or make a simple data cloning from one ECU to another.






The latest version of the software is available to download below and gives you support for:


  • EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EDC15C13  - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 31H  - Read/Write EEPROMRead/Write FLASHClear Immo Code
  • SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SIRIUS 35  - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3132 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • EMS3134 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code
  • SID301 - Read/Write EEPROM, Read/Write FLASH, Clear Immo Code, Clear IMPACT DETECTED, Read stored mileage
  • SIM32 - Read/Write EEPROMRead/Write FLASH from HD64F7055Clear Immo Code
  • SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) - Read TMS374 EEPROM, Clear Immo Code (car runs without immobilizer code)
  • IAW 6R.20 - Read/Write TMS370 EEPROM
  • IAW 6R.30 - Read TMS370 EEPROM, Clear Immo Code  (car runs without immobilizer code)
  • VALEO BII for ESPACE III - Read/Write (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup
  • VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Read transponder data, Configure, Reset to VIRGIN
  • VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - Read PINCODE, Reset to VIRGIN
  • INSTRUMENT CLUSTER for ESPACE III (1998-2002) - Reset odometer, Erase RF remote programming  by instrument cluster connector
  • SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - Read/Write 68HC05B16 EEPROM, read transponder data
  • SIEMENS UCH for MEGANE/SCENIC ('98-'02) - Read/Write 705B32 EEPROM, Read/Write configurationLearn Keys
  • LAGUNA II, ESPACE IV, VELSATIS, LAGUNA II Ph2, ESPACE IV Ph2, VELSATIS Ph2 - KeyCard Programming, Change VIN. Reset UCH to VIRGIN (! IMPROVED !)
  • MEGANE II, SCENIC II, MEGANE II Ph2, SCENIC II Ph2 - Card/UCH/ECM/ESCL, Change VIN, Reset UCH to VIRGIN (NEW FEATURES!)
  • INSTRUMENT CLUSTER for SCENIC II ('04-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM
  • INSTRUMENT CLUSTER for MEGANE II ('03-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM (NEW !)
  • CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - Read/Write EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN (NEW FEATURES !)
  • KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07-) - Key Learning, Change VIN, Reset UCH to VIRGIN (NEW FEATURES !)
  • KANGOO II (2007-2012) - Key Programming, Change VIN, Reset BCM to VIRGIN (NEW FEATURES !)
  • MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS) - Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC
  • MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • TWINGO III ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) - Clear Immo Code, Change VIN by OBDII
  • CLIO IV ELECTRIC POWER ASSISTED STEERING (JTEKT DAE/PAS) - Clear Immo Code, Change VIN by OBDII (NEW !)
  • LAGUNA III (2007-2015) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • LAGUNA III / LATITUDE (2007-2015) - Learn BCM / ECM / ESCL in protected mode
  • LATITUDE (2010+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • CLIO III / MODUS - Key Programming, Change VIN, Learn ECM in protected mode, Learn BCM, Reset BCM to VIRGIN (NEW FEATURES !) 
  • CLIO III with keyblade / MODUS - learn VIRGIN BCM (NEW FEATURES !) 
  • CLIO III - Card/UCH/ECM/ESCL  Learning, Change VIN, Reset UCH to VIRGIN (NEW FEATURES !) 
  • CLIO IV (2012+ ) learning of VIRGIN HFM Card Programming, Change VIN,Reset HFH to VIRGIN, Learn ECM / ESCL/HFM in protected mode (IMPROVED !)
  • CLIO IV (2012+ ) PAS/DAE module reset to VIRGIN (NEW !)
  • CLIO IV (2015+ ) ability to load DFLASH binary file when all cards lost (NEW !)
  • CLIO IV (2015+ ) function to remove PINCODE read protection when valid card available (NEW !)
  • MASTER III (2010-) - Key Programming, Change VIN, Reset BCM to VIRGIN
  • WIND (2010-2013) - Key Programming, Change VIN, Learn ECM
  • TWINGO II (2007-2013) - Key Programming, Change VIN, Learn ECM
  • TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL - Key Programming, Change VIN
  • LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) - Key Programming, Change VIN
  • MEGANE III / SCENIC III (2009-2015) - Card Programming, Classical Key Programming, Change VIN, Reset BCM to VIRGIN
  • MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learn BCM / ECM / ESCL in protected mode
  • KOLEOS (2008+) - KeyCard Programming, Change VIN, Reset BCM to VIRGIN
  • EDC17 / MED17/MED17 TRICORE EEPROM DUMP CRC - Reset EEPROM dump to VIRGIN, repair block CRCs (IMPROVED !)
  • SID305/306/307/308/309/310 TRICORE DFLASH DUMP CRC - Search/change KM, repair block CRCs (NEW !)
  • MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • LAGUNA III AIRBAG (AUTOLIV RC5) - Erase CRASH DATA by OBDII / direct connection
  • TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) - Erase CRASH DATA by OBDII / direct connection
  • AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) - Erase CRASH DATA by OBDII / direct connection
  • MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) - Erase CRASH DATA by OBDII / direct connection
  • MEGANE II/SCENIC II/ CLIO III WITH CARD - added UCH/ECM/ESCL learning  (NEW !)
  • MEGANE I Ph2 - PINCODE calculation from decrypted Texas 4D transponder key (NEW !)
  • CLIO II X65 AIRBAG (BOSCH AB8) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • ESPACE III AIRBAG (SIEMENS) - Erase CRASH DATA, Read/Write MCU internal EEPROM by OBDII / direct connection
  • LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) - Erase CRASH DATA, Read EEPROM by OBDII / direct connection
  • KADJAR AIRBAG (AUTOLIV AC7 with MCU XC2336) - Erase CRASH DATA by OBDII / direct connection (NEW !)

You will get exactly the same programmer + OBDII adapter as in the pictures in our gallery above.



Minimum System Requirements

  • Laptop or Desktop Computer
  • Operating System: MS Windows XP, Vista, 7,8, 10 (32-bit and 64-bit)
  • Screen Resolution: 800×600 or higher
  • The program does not need an internet connection to work

Here's what's included in package

  • Comes very well packaged
  • 1x Renault CAN/K-line ECU Tool
  • 1x Adapter ODBII - Connector RS232 Serial DB9
  • Printed instructions - how to download the User Manual, Connection Manuals and Software

Benefits of buying from a distributor

    • Genuine Product and accessories guaranteed
    • Comprehensive support for product warranties
    • High quality affordable equipment
    • Tracking Postage/Sign Delivery
    • Secure and flexible payment methods
    • We have an international reputation held by thousands of satisfied customers.
    • Honest Advice - We always strive to match the needs of a customer with the right equipment for their needs.


Subscribe to the newsletter to receive notification of new software and promotions




Write a review

Note: HTML is not translated!
    Bad           Good