SOFTWARE FIAT BSI FOR I/O TERMINAL

£427.00
Product Code: IOTERM_SOFT_FIAT_BSI
Availability: In Stock




This software support FIAT BSI (Built in systems interface)

The BSI unit is the built-in systems interface which is at the heart of multi plex wired cars. Controls most things from the immobiliser to the wipers it is VIN encrypted (it will only work on your car) and the worst point it is expensive and an absolute nightmare to change. This being because you have to re configure the whole car.

This software via I/O TERMINAL unit allows you to READ/WRITE the EEPROM memories and retrieve the PIN CODE stored in BSI controller.

All operations are done via the OBDII connector or via the BSI connector on the bench.


Current BSI units supported:


  • Read / Write the EEPROM memories
  • Read / Write FLASH
  • Reading the PIN code

R/W - Read/Write


SIEMENS/CONTINENTAL
SIEMENS/CONTINENTAL 9S12DG128 R/W FLASH | R/W EEPROM | SHOW PIN CODE
MAGNETI MARELLI
MAGNETI MARELLI 3K91D MC68HC912DG128 R/W EEPROM | SHOW PIN CODE
MAGNETI MARELLI 1K79X MC68HC9S12DG256 R/W EEPROM | SHOW PIN CODE
MAGNETI MARELLI NEC 70F3237 READ FLASH | R/W EEPROM | SHOW PIN CODE
MAGNETI MARELLI NEC 70F3378 READ FLASH | R/W EEPROM | SHOW PIN CODE
MAGNETI MARELLI NEC 70F3633 R/W FLASH | R/W EEPROM | SHOW PIN CODE


Vehicles with Freescale 3K91D,1k79X MCU's:

  • ALFA ROMEO: 147, GT
  • FIAT: Stilo (1999 - 2007), Palio (1999 - up), Idea
  • LANCIA: Thesis, Ypsilon
  • MASERATI: Quattroporte, Granturismo

Vehicles with Freescale 70F3237,70F3378 MCU's:

  • FIAT: Bravo (2007 - up), Ducato (2006 - up), Stilo (2007 - up), Punto (2007 - up)
  • LANCIA: Ypsilon (2007 - up)

Vehicles with Freescale 9S12DG128 MCU's:

  • FIAT: Panda (2003 - up)



Please note, this hardware differs from the regular I/O Terminal tool interface.  

For new HW7.0 interfaces, please use the following modification:














Software, Manulas, Diagrams and other help files can be find in our Download page

Write a review

Note: HTML is not translated!
    Bad           Good