Advanced Scooter Workshop (ASW) ver 2

£220.00
Product Code: ASWv2
Availability: In Stock





If you have lost the keys to your Piaggio, Gilera, Aprilia, Derbi, Vespa or Peugeot scooter we have good news for you !
Advanced Scooter Workshop TM  ver sion 2 help you to save many hours of time and solve the problem but you will need any transponder programmer with T5 transponder programming capability to perform final key-making steps.



Easy to Use

No drilling or cutting of ignition controller plastic enclosure, no scraping of green filling, no soldering is necessary – all memory functions works by K-Line. USB / K-Line interface connects to the ignition controller only with 4 wires. Key data for T5-11 transponder is calculated after EEPROM data reading procedure.







Supported ignition (CDI) / Injection controllers:


TABLE 1 (ASWTM)
EFI TECHNOLOGY PGN04 with STM8S105 MCU (NEW!)
▶ READ key data for programming to the T5 transponder
PHILIPS TSDI / DiTECH / PUREJET with TQFP-64 MC68HC908AZ60A (3K85K) MCU
▶ READ/WRITE MC68HC908AZ60A internal EEPROM by K-Line
▶ READ/WRITE external SPI EEPROM 25C160 by K-Line
▶ READ MC68HC908AZ60A full 64K memory area
▶ CLEAR FAULT MEMORY
▶ RESET TO NEW / IMMO-OFF
MAGNETI MARELLI IAW 5AM HW103 / HW610 injection control module (HYBRID) with EEPROM 95160
▶ READ / WRITE of external EEPROM 95160 by K-Line
▶ RESET TO NEW
MAGNETI MARELLI with TQFP-64 MC68HC05Bxx (0D54J, 0D60J) MCU (system type ACI100, ACI50X, ACI60X)
▶ READ / WRITE of MC68HC05B8/B16 internal EEPROM by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ CALCULATE CRC of key data blocks
EFI TECHNOLOGY with ST72C334 / ST72F521 MCU and 95040 / 95080 EEPROM (system type ACII, AC2I, AC5I, AC8I, AC19I, AC20I, AC21I, AC23I, AC25I AC32I etc.)
▶ READ / WRITE of ST72C334 internal EEPROM by K-Line
▶ READ / WRITE of external 95040 or 95080 SPI EEPROM by K-Line
▶ READ data of TRANSPONDER KEY in the ignition lock by K-Line. Any of EFI TEECHNOLOGY CDI now can be used as a simple transponder reader for scooter keys
▶ RESET of previously used CDI controller to the FACTORY state
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ CALCULATE CRC of key data block
MAGNETI MARELLI IMM003/IMM006 immobilizer module with 28 pin MC68HC05E6 (0F82B, 0G72G, 2F75B) MCU
▶ READ / WRITE of MC68HC05E6 (0F82B / 0G72G) internal EEPROM by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Immobilizer Control Unit to the FACTORY state
MAGNETI MARELLI MIU1 (32MIU1) injection control module / throttle body with ST10F269-T3 MCU
▶ READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
MAGNETI MARELLI MIU2 (32MIU2) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160
▶ READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
MAGNETI MARELLI MIU4 (32MIU4) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160
▶ READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
MAGNETI MARELLI MIU G3 (32M3G1 / 38M3G1) injection control module / throttle body with Infineon SAK-XC2060 and EEPROM 95320
▶ READ / WRITE of external EEPROM 95320 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Injection Control Unit to the FACTORY state
▶ CALCULATE CRC
MAGNETI MARELLI RIU1 (32RIU1 / 38RIU1) injection control module / throttle body with Infineon SAK-XC2785X and EEPROM 95320
▶ READ / WRITE of external EEPROM 95320 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Injection Control Unit to the FACTORY state
▶ CALCULATE CRC
MAGNETI MARELLI IAW15 injection control module with MOTOROLA MC68HC11F1 (2E87J) MCU
▶ READ / WRITE of internal MC68HC11F1 EEPROM by K-Line
▶ CALCULATE MASTER key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Injection Control Unit to the FACTORY state
▶ CALCULATE CRC
 
 



Screenshots:




Random YouTube Video (not ours)

https://www.youtube.com/watch?v=tTVxKVVDD3I

https://www.youtube.com/watch?v=rPKxeg4hUbs

https://www.youtube.com/watch?v=YCscD8K6NC0


What will you get

Advanced Scooter Workshop ver.2  + USB cable type A/B



Software and Manuals


All necessary files can be found in the DOWNLOAD section



Write a review

Note: HTML is not translated!
    Bad           Good