Advanced Scooter Workshop (ASW)

£220.00
Product Code: ASW
Availability: Out Of Stock

Estimated date of the new delivery around the end of September 2018, but may be later

You can sign up to receive our email newsletter and we'll let you know

We only send information about our new products and software updates.





If you have lost the keys to your Piaggio, Gilera, Aprilia, Derbi, Vespa or Peugeot scooter we have good news for you !
Advanced Scooter Workshop TM help you to save many hours of time and solve the problem but you will need any transponder programmer with T5 transponder programming capability to perform final key-making steps.



Easy to Use

No drilling or cutting of ignition controller plastic enclosure, no scraping of green filling, no soldering is necessary – all memory functions works by K-Line. USB / K-Line interface connects to the ignition controller only with 4 wires. Key data for T5-11 transponder is calculated after EEPROM data reading procedure.







Supported ignition (CDI) / Injection controllers:


TABLE 1 (ASWTM)
EFI TECHNOLOGY PGN04 with STM8S105 MCU (NEW!)
▶ READ key data for programming to the T5 transponder
PHILIPS TSDI / DiTECH / PUREJET with TQFP-64 MC68HC908AZ60A (3K85K) MCU
▶ READ/WRITE MC68HC908AZ60A internal EEPROM by K-Line
▶ READ/WRITE external SPI EEPROM 25C160 by K-Line
▶ READ MC68HC908AZ60A full 64K memory area
▶ CLEAR FAULT MEMORY
▶ RESET TO NEW / IMMO-OFF
MAGNETI MARELLI IAW 5AM HW103 / HW610 injection control module (HYBRID) with EEPROM 95160
▶ READ / WRITE of external EEPROM 95160 by K-Line
▶ RESET TO NEW
MAGNETI MARELLI with TQFP-64 MC68HC05Bxx (0D54J, 0D60J) MCU (system type ACI100, ACI50X, ACI60X)
▶ READ / WRITE of MC68HC05B8/B16 internal EEPROM by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ CALCULATE CRC of key data blocks
EFI TECHNOLOGY with ST72C334 / ST72F521 MCU and 95040 / 95080 EEPROM (system type ACII, AC2I, AC5I, AC8I, AC19I, AC20I, AC21I, AC23I, AC25I AC32I etc.)
▶ READ / WRITE of ST72C334 internal EEPROM by K-Line
▶ READ / WRITE of external 95040 or 95080 SPI EEPROM by K-Line
▶ READ data of TRANSPONDER KEY in the ignition lock by K-Line. Any of EFI TEECHNOLOGY CDI now can be used as a simple transponder reader for scooter keys
▶ RESET of previously used CDI controller to the FACTORY state
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ CALCULATE CRC of key data block
MAGNETI MARELLI IMM003/IMM006 immobilizer module with 28 pin MC68HC05E6 (0F82B, 0G72G, 2F75B) MCU
▶ READ / WRITE of MC68HC05E6 (0F82B / 0G72G) internal EEPROM by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Immobilizer Control Unit to the FACTORY state
MAGNETI MARELLI MIU1 (32MIU1) injection control module / throttle body with ST10F269-T3 MCU
▶ READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
MAGNETI MARELLI MIU2 (32MIU2) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160
▶ READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
MAGNETI MARELLI MIU4 (32MIU4) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160
▶ READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
MAGNETI MARELLI MIU G3 (32M3G1 / 38M3G1) injection control module / throttle body with Infineon SAK-XC2060 and EEPROM 95320
▶ READ / WRITE of external EEPROM 95320 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Injection Control Unit to the FACTORY state
▶ CALCULATE CRC
MAGNETI MARELLI RIU1 (32RIU1 / 38RIU1) injection control module / throttle body with Infineon SAK-XC2785X and EEPROM 95320
▶ READ / WRITE of external EEPROM 95320 by K-Line
▶ CALCULATE both MASTER and SERVICE key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Injection Control Unit to the FACTORY state
▶ CALCULATE CRC
MAGNETI MARELLI IAW15 injection control module with MOTOROLA MC68HC11F1 (2E87J) MCU
▶ READ / WRITE of internal MC68HC11F1 EEPROM by K-Line
▶ CALCULATE MASTER key data for programming to the T5-TYPE11 transponder
▶ RESET of previously used Injection Control Unit to the FACTORY state
▶ CALCULATE CRC
 
 



Screenshots:




Software and Manuals


All necessary files can be found in the DOWNLOAD section



Write a review

Note: HTML is not translated!
    Bad           Good