I/O TERMINAL FULL
I/O TERMINAL FULL with Programmer HW 10
Both, our and one of the leading programmers on the car electronics market
The I/O Terminal it is a great tool with a wide range of functionality for many cars. To repair some ECU (Electronic Control Unit), normally you have to open ECU and connect BDM programmer.
The I/O Terminal can offer functions programming ECU without require it to be opened. All procedures can accomplish via CAN/K-line or from OBD in some rare cases.
The I/O Terminal also supports some difficult controllers ECU that are not covered by other tools.
We offer here only hardware: programmer + 2 adapters + USB cable
The programmer works with software for the I/O Terminal, which you can buy separately according to your needs.
There were many questions regarding the differences between the hw7.0 and 10 programmer, we present these differences below.
Most operations are done via the OBD2
After purchase you will receive:
- I/O TERMINAL HARDWARE MULTITOOL HW 10 programmer
- I/O TERMINAL PSA BSI Adapter (OBDII - DB9)
- I/O TERMINAL ECU Adapter (OBDII - DB9)
- USB 2.0 lead type: USB A/B - 1.8m
Full activated software withh SIM cards available at the date of purchace.