I/O TERMINAL HARDWARE HW 10
I/O TERMINAL Programmer HARDWARE HW 10
Both, our and one of the leading programmers on the car electronics market
The I/O Terminal it is a great tool with a wide range of functionality for many cars. To repair some ECU (Electronic Control Unit), normally you have to open ECU and connect BDM programmer.
The I/O Terminal can offer functions programming ECU without require it to be opened. All procedures can accomplish via CAN/K-line or from OBD in some rare cases.
The I/O Terminal also supports some difficult controllers ECU that are not covered by other tools.
We offer here only hardware: programmer + 2 adapters + USB cable
The programmer works with software for the I/O Terminal, which you can buy separately according to your needs.
There were many questions regarding the differences between the hw7.0 and 10 programmer, we present these differences below.
Difference between the HW 8.0 and HW 10 programmer
HW 8.0 is for users who going to work with more than one software, e.g. SIEMENS, BOSH, DENSO, etc ... each of these programs has a separate SIM card which must be inserted into the programmer before work.
Programamtor HW 8.0 has one slot for SIM card, HW 10 has 6 slots for SIM cards
The HW 8.0 Programmer has also standard OBDII cable which is the equivalent of TYPE1 of the HW 10 set
The possibility of both programmers are identical and work with the same software.
Features of the I/O TERMINAL Multitool HW 10
On the top of programmer there are:
- small button to switch between SIM cards,
- USB port (computer connection)
- No FIAT BSI switch with 120 Ω resistor from the circuit like in HW 8 before
Ad.1) The mono switch is used to switch between the cards you want to use. The LED display at the front of the programer is showing the number of the selected card.
Ad.2) The USB port is used to connect the programmer to the computer
The LCD display on the front of programmer shows the number of selected SIM card in operation.
Below the display there is a sticker, so you can write down number of the SIM slot assigned to the software. (it comes also with spare sticker)
If you have HW 8 - there no sense to buying HW 10 (not many changes)
After purchase you will receive :
- I/O TERMINAL HARDWARE MULTITOOL HW 10 programmer
- I/O TERMINAL PSA BSI Adapter (OBDII - DB9)
- I/O TERMINAL ECU Adapter (OBDII - DB9)
- USB 2.0 lead type: USB A/B - 1.8m
No software, no activations or activation files or SIM cards are included by buying this programmer. These are separate elements selected as needed.
Familiarize yourself with the software to learn about the programmer capabilities.
Related Products
SmartProg Basic
The newest programmer to program eeprom memory and processors in circuit. You can also erase crash data, decode radios and more. You don't have to desolder chip, which improves your work comfort. ..
I/O TERMINAL HARDWARE HW 9.0
I/O TERMINAL Programmer HARDWARE HW 9.0 This is only hardware, programmer unit & standard ECU adapter (ODBII-DB9) Previous versions of I/O TERMINAL were sold without housing, just PCB like A..
Diagnostic adapter X437A for T-CAN PRO
Diagnostic adapter X437Afor Tesla Diagnostic Tool T-CAN PRO Original adapter for T-CAN PRO Tool Diagnostic Tool T-CAN PRO is the first independent device on the market supporting diagnosti..
EDC15 Generator for I/O Terminal
EDC15 Generator for I/O Terminal the generator allows you to bypass the immobilizer What is that ? EDC15 generator let you send FX,FY and FZ needed signals for I/O Terminal to..