YANHUA BMW 35160/35080 Programming Emulator

for BMW 35 series odometer correction

The Emulator can simulate BMW 35xx series memory

Designed for BMW M35xx. 

Support EEPROM 35080, 35160

It Comes with program saved in emulator which can adjust mileage directly.

For 35160WT chips that cann't be erased, also

supports the following EEPROM's

•  M35080
•  M35080-3
•  M35080-6
•  M35080V6
•  M35080VP
•  080DOWQ
•  080DOWT
•  160DOWQ
•  160DOWT

Information

BMW Dashboards since August 2015 are equipped with a 35160WT EEPROM which is not erasable and has page-id which locks this memory to its own dashboard-micro. If you need to correct such a dashboards you CANNOT erase or substitute the original memory with recovered/bought one. You have to emulate the original memory with this emulator.

Attach the emulator to the computer using the USB/ mini USB lead.

The emulator memory (94KB) will be automatically displayed with content which is the program and help files.

Instructions:

Operating Instructions:

1. Chip Soldering

Solder the 35XX chip on the meter to the specified location of the simulator, 

pay attention to the chip direction.

2. New folder 

Add a new folder on your desktop, for example, named "mileage modification."

3. Simulator connection

Connect the emulator to the Mini usb cable, plug in the computer usb interface, 

and a USB flash drive with the name (35xxx memory) on the computer "has removable storage device" be added.

4. Decompress the modification tool

Open the (35xxx memory) U disk, copy compressed the file of 35xx mileage modification tool .rar and put to the desktop ¡°mileage modification¡± folder, and then decompress it to the current folder to get the file of 35xx mileage modification tool .exe .

5. Copy the original data to "mileage modification" folder on the desktop .

According to the model of the original car chip, select the corresponding original data and copy it to the¡°mileage modification¡± folder

on the desktop.

(If the original car chip is 35080, choose 35080 raw data.bin, if the original car chip is 35160, then choose 35160 raw data. bin,

if the original car chip is 35160, then choose 35160 raw data. bin)

6. Open the mileage modification tool

Open the ¡°mileage modification¡± folder, press the left mouse button to drag the original data to the modification tool or double-click to open the ¡°35XX mileage modification tool¡±, drag the original data into the tool interface and press Enter to confirm.

7. Modify mileage

Enter the mileage data you want to modify as prompted (note the mileage you want to put with a unit ,like XXXkm or XXXmi), then press Enter to confirm, and the new file 35xxx raw data _yyyy.bin will be automatically generated.

8. Copy the modified data to the "35XX memory" U disk

Open the "35XX Memory" USB flash drive, delete the 35xxx simulated data  .bin file of the corresponding chip (note the "simulated" data file), and then copy the 35xxx original data _yyyy.bin file generated in the "mileage modification" folder to the "35XX memory" U disk.

9. Data comparison

Re-plug the simulator, open the "35XX memory" U disk, compare the newly generated simulated data of the corresponding chip and the modified data in the "mileage modification" folder. If the data is the same, the operation is successful. Solder the simulator to the instrument chip location.

Tip: The copied raw data.bin file is recommended to be saved to the computer, so that the data can be recovered when the operation is wrong. If the operation is abnormal, don't be nervous. Unplug the usb and plug it back to restore normal.

if it's still not clear, watch the video